Playback - Teufel Impaq 8000 Technical Description And User Manual

5. Select "Impaq 8000" from the list of detected
devices.
Pairing is now complete and your Impaq 8000
will now act as a Bluetooth
Impaq 8000 will now play back all sounds that
would otherwise be played by your source device/
smartphone.
Pairing via NFC
NFC (Near Field Communication) is a transmission
standard for the wireless exchange of data over short
distances. Your Impaq 8000 can create a connection
to a compatible source device via NFC.
1. Switch the NFC function on your source device
®
on (Bluetooth does not have to be turned on the
source device).
2. Hold your source device close to the NFC contact
zone on the top side of the Impaq 8000 (see fig.
right).
If FM or AUX is selected as the source, the
Impaq 8000 will automatically switch to Bluetooth
mode. After a short time, you will be asked to allow
the NFC connection.
3. Confirm the request on your source device.
Pairing is now complete and your Impaq 8000
will now act as a Bluetooth
Impaq 8000 will now play back all sounds that
would otherwise be played by your source device/
smartphone.

Playback

The volume setting of the source device also
affects the volume of the Impaq 8000.
1. Use the button (34) to select Bluetooth
source.
2. On your source device, switch the Bluetooth
tion on.
3. Start playback on your source device.
– Depending on the source device, you can use the
playback functions of the Impaq 8000 completely
or in part with your source device (see "Playback
functions" on page 38). Otherwise, you can con-
trol playback on your source device.
– If your source device is a smartphone, the Bluetoo-
®
th connection will be interrupted in the event of
an incoming call and you can make phone calls as
usual.
After finishing your phone call, the sounds will
once again be diverted and played back by your
Impaq 8000.
®
playback device. The
®-
®
playback device. The
®
as the
®
func-
®
– If your Bluetooth source device has a USB charg-
ing cable, you can connect it to the USB ports (6) or
(14) for supplying power.
– To terminate the Bluetooth
®
the Bluetooth function on your source device and
select another source on the Impaq 8000.
®
connection, turn off
• Impaq 8000 33