Menu "System - Teufel Impaq 8000 Technical Description And User Manual

Settings

Menu "System"

"System information"
With this menu item, you can access the version of
the firmware of your Impaq 8000.
"Screensaver"
This darkens the screen after a configurable period of
inactivity, e.g. to prevent burn-in on plasma screens.
Possible values: 5, 10, 15, 20 minutes and Off.
"Auto Off"
After the screensaver activates (see above), the
receiver waits for the configured period of time to
elapse before automatically switching to standby.
Possible values: 30 minutes, 60 minutes, never.
" Disk Auto Start"
With this setting, you determine whether playback will
automatically start or not after you insert a CD/DVD/
BD. Possible values:
• On – playback starts automatically (not possible
with some Blu-ray discs)
• Off – playback does not start automatically.
" HDMI CEC"
If this function is activated, CEC-compatible devices
are controlled by a control command via the HDMI
connection. As a result, devices connected to the TV
set are e.g. automatically activated and deactivated
using the remote control for the television set.
Possible values: On, Off.
" HDMI ARC"
The audio return channel (ARC) switches on to play
back the television audio via the HDMI cable (see „TV
set" on page 14). The TV set must support this
function.
" BD live storage"
The BD Live function creates a folder " BUDA" stick for
saving data on the USB. You can delete data here if
the memory on your stick runs full.
• Information – Displays the available memory on
the inserted USB stick or displays "No USB".
• Clear BD live data – clear the memory used by BD
Live on the USB stick.
26 • Impaq 8000
" DMR"
Switches the DLNA-DMR (Digital Media Renderer) on
and off (see „DLNA mode" on page 37).
" DivX® VOD DRM"
®
You can find the DivX VOD registration code of your
Impaq 8000 here. You can register your device with
this code to permit you to play DivX
by copyright and copy protection. For more informa-
tion, visit the website vod.divx.com.
"Firmware Update"
If the Impaq 8000 is constantly connected to the
Internet, it will check every time it turns on whether an
updated version of its operating software (" firmware")
is available and will initiate the update process after
confirmation.
You can manually load the update for your
Impaq 8000 via the Internet connection with this
menu item. For this, follow the on-screen instructions.
Alternatively, you can download the new firmware from
the Teufel website and save it on a USB stick. As soon
as you insert the USB stick in the USB port (14), the
new firmware will be detected. An info window on the
screen indicates this. Follow the instructions to install
the update.
The update will take several minutes, during which
time you must not turn off the device and interrupt the
Internet connection. After the update, you reset the
Impaq 8000 to the default settings (see the following
section).
"Default settings"
Here, you can reset all receiver settings to the default
settings. After the reset, you will have to reconfigure
your individual settings.
® videos protected