Tv Set; Headphones; Inputs For Source Devices - Teufel Impaq 8000 Technical Description And User Manual

TV set

Connect your TV set (e.g. television, projector) with the
HDMI TV (13) connector. You will need a HDMI cable
for this.
If your TV set does not emit audio via HDMI ARC, you
can assign one of the audio inputs of the Impaq 8000
to the TV set in the "Audio Mapping" menu (see page
14).

Headphones

You can connect stereo headphones with a 3.5 mm
jack plug to the jack (7) on the front side.
7
The speakers and the outputs to the subwoofer (19)
and to the power amplifiers (20) will be automatically
deactivated when you connect the headphones.
CAUTION
Extended listening at high volumes
may lead to hearing loss.
– To avoid damage to health, avoid
extended listening at high volumes.
Risk of injury/damage!
– Lower the volume before you pull out the
headphone plug out again; otherwise, the
speakers may emit unexpected high sound
pressure. This could injure your hearing or
damage the device.
14 • Impaq 8000
13

Inputs for source devices

The receiver offers you three inputs for digital HDMI
picture and audio sources (HDMI 1, 2, 3).
An optical and coaxial digital audio input and ana-
logue audio input (AUX IN) are also available.
You can also connect the audio output of your televi-
sion set – provided that it doesn't support the HDMI
ARC feature – to one of these audio inputs in order
to listen to audio from the Impaq 8000 for television
programmes. See the user manual of your television
set for more information.
12
18
HDMI 1, 2, 3 (12)
You can connect a source device with a digital picture
and audio signal to each of these inputs. You will
need a HDMI cable for this.
OPTICAL (16)
You can connect the optical digital audio output of a
source device here. You will need an optical cable with
a TOSLINK plug for this. Your source device requires
either an optical 3.5 mm plug or also a TOSLINK plug.
COAXIAL (17)
You can connect the coaxial digital audio output of a
source device here. You will need a coaxial cable with
RCA plugs to do so.
AUX IN (18)
You can connect a source device with analogue audio
here. You will need a stereo RCA cable for this (L and
R).
17 16