Main Menu "Settings; Menu "Video Setup; Settings - Teufel Impaq 8000 Technical Description And User Manual

Main menu "Settings"

You can configure the settings of the Impaq 8000
here.

Menu "Video setup"

Here you can configure the settings for the connected
image playback device (e.g. TV, projector):
" TV aspect ratio"
Configuring the display on the TV set:
• 16:9 normal – 4:3 movies are displayed with the
full height and black bars on the left and right side
on a 16:9 TV set, which is optimal as with 16:9
movies.
• 16:9 full screen – 4:3 movies are displayed with
the full height and stretched width on a 16:9 TV
set, 16:9 movies are optimally rendered.
" Resolution"
Here you can set the resolution in which the
Impaq 8000 supplies all videos and images to the TV
set.
Automatic – the highest possible resolution will be
automatically selected (also with UHD-TVs).
4K / Ultra HD – only for UHD TVs, which do not
display a stable picture in "Automatic" mode (e.g. with
Blu-rays). Set the resolution of video output to 4K and
scale the video resolution of BD and video files up to
4K.
Full HD – suitable for conventional full HD TVs.
HD ready – suitable for HD Ready TVs.
SD – only suitable for non-HD devices.
After changing the resolution, a window where you
have to confirm the new resolution with "OK" appears;
otherwise it will switch back to the previous resolution
after 15 seconds.
"HDMI colour space"
Adjust the colour playback to your TV set. Please
closely follow the user manual for your TV set for this.
Possible settings:
• Automatic – automatic compensation.
• YCbCr (also referred to as YUV 4:4:4) – should
only be used with corresponding suitable TVs.
• YCbCr422 (also referred to as YUV 4:2:2) – ideal
for conventional HDMI televisions.
• Full RGB – 256 values per colour, for PC monitors.
• RGB – values per colour from 16 to 235, for HDMI
TV sets, which display unclean colours with another
setting.
"HDMI Deep Colour"
"Deep Colour" expands the colour range via HDMI;
however, this function cannot be used by all TV sets.
• Automatic – automatic setting.
• Off – if "Autom" displays incorrect colours.
"HDMI 1080p 24Hz"
Movies are saved on Blu-ray discs with the full res-
olution and 24 frames/second (1080p24). Not all
television sets are capable of rendering such frame
rates. Deactivate this option if the picture flickers or
stutters excessively. However, Blu-ray discs will stutter
slightly at regular intervals in this case.
"HDMI 3D"
Activate and deactivate transmission of three-dimen-
sional movies.

Settings

• Impaq 8000 21