After condenser unit is set in place, install the top cap saved
10
in Step 1. See Figure 45.
11
Caulk (watertight) ends of splice cap and vertical seam. See
Figure 45.
Figure 45. Caulk and install parts, Steps 10–13
Reinstall top cap
saved from Step 1
IM 738-2
Caulk ends of
splice cap
Reinstall 1/2" bolt
saved from Step 1
Mechanical Installation: RPS/RDT Factory Split at Condensing Unit
Install 1/2" bolt removed in Step 5. See Figure 45.
12
Install splice cover (provided), see Figure 45.
13
Nut clip-on provided
35