Rinnai Arriva 752 Installation Manual page 21

Wall terminal kit
Code: ESWTERM
Used to terminate the ESPIPE900 in
horizontal flue installations when used
in conjunction with the ASPKIT03.
Contains:
• External wall plate (black PVC)
• Flue terminal (aluminium)
Coaxial flue pipe 900 mm
Code = ESPIPE900
Extension pipe used to construct
horizontal, vertical, and downwards
flueing. Can be cut to size.
Inner is aluminium, and outer is white
PVC plastic. Comes with one wall
bracket, o-ring (4350), and spacer
(4351).
Ø 50 mm
35 mm
Female end (do not cut)
Male end (can cut), protrudes approx.
25 mm from bottom of pipe
Ø 75-80 mm
45° flue bends (x2)
Code: ESBEND
Two 45° bends used to facilitate
between horizontal, vertical, and
downwards flueing. Two spacers are
included.
Can be used separately, or together
as one 90° bend (refer p. 16 for
dimensions).
Condensate trap
Code: ESCONDK
Supplied with a 750 mm drain tube
(not pictured).
ONLY ordered as a
separate item if doing
through-wall vertical
flueing.
Wall plate
Code: ESPLATE
Used if an extra wall cover
is required to tidy any installation
through the wall, ceiling, or floor.
Outer diameter 170 mm.
Steel flue guard (warm white)
Code: R1370
Protection against hot flue gases
when the termination is low to the
ground. Colour - warm white.
• 220 x 220 mm (wall plate)
• Ø 146 mm
Arriva 752 Installation Guide: 12218-F 06-18 | 21