Extron electronics RGB-DVI 300 User Manual page 46

Command
Freeze
Enable Freeze
Disable Freeze
View Freeze Status
KEYS:
X@
Freeze Status (0= disabled; 1= enabled).
RGB Delay Time
Set Delay Time
View Delay Time
KEYS:
X2!
= RGB delay —
The screen blanks during transition between inputs of different resolutions, to avoid glitches in the video output.
This option is only available in units that shipped after Q3 2010. Please consult the Extron Service Department if you have any questions.
Enable
Disable
View Status
KEYS:
X@
= Front Panel Security Lockout Status (0= disabled; 1= enabled).
Menu Time Out
Set Menu Time Out
View Menu Time Out
KEYS:
X2@
= Menu Time Out — Sets the time out for the on-screen menu (0 = No time out; 1 to 64 in seconds [default = 10]).
Overscan Mode — Applies only to SMPTE (480p - 1080p) Input Rates
Set Value
View Status
KEYS:
X!
= Input Video Format — 1 = RGB
X2^
= Overscan Mode — applied only to SMPTE (480p - 1080p) input rates:
0= 0% (default for RGB input type). A "true" Auto-Image is executed on SMPTE inputs.
1= 2.5% (default for YUV input type). An Auto-Image command snaps to a 2.5% table; no true Auto-Image.
2= 5%. An Auto-Image command snaps to a 5% table; no true Auto-Image.
ASCII command
(host to device)
1F
0F
F
E X2! }
VDLY
E }
VDLY
0 to 50 in tenths of a second (0 to 5 seconds; default = 5 [0.5 seconds]).
1X
0X
X
E X2@ }
MDUR
E }
MDUR
E X! X2^ }
* OSCN
E X! }
OSCN
2 = YUV
Response
(device to host)
]
Frz1
]
Frz0
X@]
Frz
X2!]
Vdly
X2!]
Vdly
]
Exe1
]
Exe0
X@]
Exe
X2@]
Mdur
X2@]
Mdur
X! X2^]
Oscn *
X! X2^]
Oscn *
RGB DVI 300 and RGB HDMI 300 (A) • SIS Commands
Additional description
38