The
Add Device...
screen closes. The main
Firmware Loader
window is now visible.
Figure 32.
Firmware Loader Main Window
9.
Click Begin.
The firmware transfer takes approximately 3 minutes. The progress of the transfer is shown
by a green bar in the
Total Progress
panel.
NOTE: During the firmware upload, the front panel LED and video output are disabled.
When the transfer is complete, the
column in the
panel reads 100%
Progress
Devices
and the
column reads
.
Status
Complete
RGB DVI 300 and RGB HDMI 300 (A) • Software and Firmware
28