Table of Contents
Advertisement
T
HE SEAT POST SHOULD NOT BE EXTENDED BEYOND THE ENGRAVED SAFETY MARK
Safety
mark
2.2 Adjusting the fork
The fork of the
Iris
Brose,
by using the thumbwheel at the top of the fork.
2.3 Adjusting the brakes:
Your BROSE e-bike is equipped with front and rear hydraulic disc brakes. The maintenance of this system
must be carried out by a specialist. Nevertheless, here are a few recommendations:
-
Periodically check the condition of the lining on the brake pads. It is important to avoid leaving this
until the last minute as if the lining is damaged, the disc rubs against the metal of the pads which
damages them.
Here are 2 ways to monitor the wear and tear on your pads:
o By sound: the braking sound will be more metallic when the lining is worn.
o By sight: you can see the thickness of the lining when looking from the front of the calliper.
Regularly check the condition of the discs to ensure they are clean and not too worn. Only use alcohol or
water to clean the discs.
Completely avoid any contact with greasy substances on the disc and the pads. The pads must
-
always be changed should this occur (they are porous and will absorb the greasy substance).
A
S A GENERAL RULE
RECOMMEND THAT YOU CALL A SPECIALIST SHOULD YOU HAVE ANY DOUBTS ABOUT WHAT TO DO
Montana Brose
and
,
THE HYDRAULIC DISC BRAKING SYSTEM SHOULD NOT BE ADJUSTED BY NON
Cronos Brose
is adjustable and lockable. Locking is carried out
BROSE Manual
5
(
).
VERTICAL BARS
Pad
Disc
-
EXPERTS
.
. W
E
Advertisement
Table of Contents
