Charging The Battery; Neomouv Lithium Ion 36-Volt Charger - neomouv Montana Brose User Manual

Table of Contents

Advertisement

4.1 NEOMOUV Lithium Ion 36-volt charger

The charger that comes with your bike is compliant with CE manufacturing standards, and with the IEC/EN
60335-1 environmental protection standards. It has been specially designed to recharge the battery of your
electric bike. It will fully recharge your battery in 4 to 6 hours dependent on the ambient temperature and
wear of the battery. This charging time, referred to as "slow", is deliberate in order to preserve the life of your
battery.
It is easy to operate: plug the charger's output jack into your battery's socket, then plug it into the mains.
Your charger has an LED charging diode that shows the battery charge level. It is red when the battery is
charging and changes to greed once the battery had been charged.
4 -

CHARGING THE BATTERY:

(Nova
48-volt model
Smart charger for a Lithium Ion battery
Voltage
Frequency
Charging voltage (load)
Output current
LED power indicator: red
LED charge indicator: green
Efficiency (at full load)
Operating temperature range
Humidity
Safety standard
Weight
Dimensions
36-volt model
Smart charger for a Lithium Ion battery
Voltage
Frequency
Charging voltage (load)
Output current
LED power indicator: red
LED charge indicator: green
Efficiency (at full load)
Operating temperature range
Humidity
Safety standard
Weight
Dimensions
BROSE Manual
CHARGER FEATURES
Brose/Cronos
Brose/
Montana
CHARGER FEATURES
(Iris
14
Brose)
JCLC084V42M
AC100V-240V
42 V+/- 0.2 V
disconnected from the
Between 10° C and 35°
EN60335 –1- A2 –2006
165x73x47 mm
Brose)
STC-8127LC
AC220 -240 V
Charged or disconnected
from the battery
Between 10° C and 35°
EN60335 –1 : 2012 +
A11 + A13
125x62x35 mm
47-63 Hz
2.0 A
Charging
Charged or
battery
100 %
C
<+ 90 %
460 g
50-60 Hz
42 V
2.0 A
Charging
100 %
C
<+ 90 %
300 g

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iris broseCronos broseNova brose

Table of Contents