Table of Contents
Advertisement
An LED light on the top of the charger shows the battery charge level. It is red when the battery is charging
and changes to green once the battery has been charged.
4.1.1
Precautions (safety instructions):
•
Do not connect the charger plug to the mains with wet hands (risk of electrocution).
•
All charging must be carried out in a ventilated area.
•
Always check that the charger is compatible with the local power supply.
Do not place the apparatus in a damp environment or near a flammable or explosive substance while it
•
is charging (any charge producing heat involves the risk of fire or explosion).
Do not store the apparatus while it is hot.
•
Do not charge a faulty or worn-out battery.
•
•
Do not leave a plugged-in charger and its connections within the reach of children.
•
Do not attempt to disassemble the charger.
4.1.2
Protecting the charger:
Do not expose it to rain.
•
Do not leave the charger disconnected from the power supply (220 volts) but plugged into the battery.
•
•
Do not submerge the charger.
•
Do not place any objects on the charger or cover it.
•
Look after the charger's input and output cables.
To protect the charger after a long charging period (more than 24 hours), disconnect the electrical
•
connection and let the device rest in a dry and ventilated space.
Avoid leaving the charger connected to the mains for more than 24 hours.
•
•
WARNING! For your safety, opening the charger is prohibited (risk of electric shock –
high voltage). Contact your dealer should any faults occur with your charger.
For your safety, also look at the pictograms on the back of the charger.
1) Compliance with CR standards
2) Double insulation
3) Do not throw out with household waste
4) Comply with the polarity
BROSE Manual
15
Green LED: battery charged
Advertisement
Table of Contents
