Table of Contents
Advertisement
Display holder
USB socket
Your display holder has a USB socket that can be used to recharge your electronic devices.
Removing the display from the holder
Your display can be removed from the holder from the top. To do this, make sure that the system is
completely switched off. Make sure that the safety screw under the display support is not tight. Then press
the push button at the top of the holder to release the display.
(The safety screw under the holder is there to ensure that the display does not come off too easily).
To put the display back on the holder, slide it into the tracks from the top.
BROSE Manual
11
Advertisement
Table of Contents
