Chapter 2: Getting Started - AAXA Technologies P300 Neo User Manual

Getting Started
Plugging In the projector
1. The P300 Neo-S needs to be plugged in and charged for four to five hours before
operation. Please ensure the On/Off switch is in the "Off" position during this time
Powering ON the projector
1. Connect the power cord to the P300 Neo-S.
2. Connect the other end of the power cord into the wall power source.
3. Move the On/Off swtich to the "On" position. Your projector should start up.
Powering OFF the projector
1. To turn off the projector, use the power button
Using the On/Off switch will fully turn off the projector.
Connecting to WiFi
1. View page 8 for details.
Connecting to a Bluetooth Device
1. View page 10 for details.
Chapter 2
on the remote or the On/Off switch.
5