Do you have a question about the P300 and is the answer not in the manual?
Questions and answers
Dennis Carter
March 1, 2025
cAN YOU OPERATE AP300 PICO PROJECTOR WITHOUT HT E REMOTE CONTROLL
1 comments:
Mr. Anderson
March 1, 2025
Yes, you can operate the AAXA Technologies P300 Pico Projector without the remote control. You can turn it on and off using the power button on the keypad. Holding the power button for 3 seconds will turn off the projector and put it in standby mode. To fully turn it off, you need to switch the On/Off switch on the side of the projector to the "Off" position.
Caution! Table of Contents Chapter 1: P300 at a glance Connecting a Micro SD Card WARNING: Please use this product as instructed. Misuse may cause injury or death. Main Unit Front/Back Connecting to a USB Host Remote & Keypad Chapter 3: Menu Screens...
Focus Adjustment VGA Port Both the keypad and remote can be used to navigate through the menus. The Main Menu Navigation on the remote functions exactly the same as the directional pad on the P300 unit. Headphone Port USB Port NOTICE: Pressing power on the remote will only put the projector in STANDBY mode.
“Off” position Power Adapter A/V Cable Internal Battery (sold separately) Note: The P300 Projector battery does not charge when it is in operation. *Under various circumstances, the actual accessories may be different from those shown in the pictures above.
Focus Adjusment / Throw Distance Installing the Battery Pack Focus Adjustment 1. Remove the three screws circled in blue holding the P300 battery. 2. Connect the battery harness to the battery recep- • Spin the focus wheel up or down until the image becomes tacle on the PCBA clear.
Windows XP computer – not all systems are the same. Step 2: Step 5: Step 6: to your P300’s 1. Right click on computer desk- Connect the small end of the top and select “Properties” VGA Adapter 2.
Connecting to a Computer via HDMI Connecting to a Computer Cont. Step 1: Step 4: Enabling VGA or HDMI output on your Computer – To enable VGA or HDMI output on your com- Connect one end of the to your computer’s puter most computers require “turning on”...
The P300 can connect to many media devices including: iPod, iPhone, iPad, VHS players, DVD players, smart phones, cameras, video game consoles and other peripherals with ease. *Apps on smart phones require video out capabilities to be displayed with the P300.
The P300 can connect to many media devices including: iPod, iPhone, iPad, VHS players, DVD players, smart phones, cameras, video game consoles and other peripherals with ease. *Apps on smart phones require video out capabilities to be displayed with the P300.
Page 10
How to insert your Micro SD Card the projector’s speaker adapter. • Slide in your SD card into the SD card slot on the front of the P300. (as shown in picture) • Gently slide the SD card until it *clicks* into place.
Page 11
File Menu System • Once your USB Drive has been in- • The P300 will show all folders and files serted, you can navigate to any media you have on your SD Card in the C: content in the main menu..
USB Host Cont. Menu Screens Main Menu The P300 features a built in PMP (Portable Media Player) function. This function allows the projector to play videos, pictures, music files, and text. To access the main menu simply turn on the projector.
Video Video Video Video The P300 will show all folders and files you have on your USB or SD Drives. Use the directional buttons to navigate to different folders or files. Previewing Files: • Press the directional keys to highlight the item of interest •...
4. Move selection on video player menu to “repeat”, and confirm The P300 will show all folders and files you have on your USB or SD Drives. Use the directional buttons to navigate to different folders or files. the selection.
Photo Menu Photo Slideshow FAQ How do I play a slideshow? How do I manually control the Viewing Pictures 1. Choose either USB or SD Card slideshow? To use the photo controls, use the directional keys to highlight the option you wish for playback After selecting the photo you wish to to choose.
Playback Rewind Next Repeat Sound Play / The P300 will show all folders and files you have on your USB or SD Drives. Fastforward Track Track Pause Use the directional buttons to navigate to different folders or files. Previewing Files: •...
Navigate to your playlist folder. The P300 Pico Projector allows you to view text files. Select the file you want to view in 4. Move selection on music player Start at first song.
Within the settings menu there are • picture - 4:3, 16:9* Time four more submenus that allow you to Noise Reduction • Clock customize your P300 to the settings • Option to reduce the noise • Off Time you want. (grain) of the picture •...
Sound Settings Time Settings Sound Mode Clock • Change the sound mode depend- • Adjust the time/date. ing on what is currently playing. Off Time Balance • Sets a time for auto turn off of • Adjusts the balance of the sound, projector from left to right.
Option Settings Keystone Adjustments OSD Language • Changes the language of the device. Restore Factory Default • Restores the projector to factory settings. Blending What is Keystoning? • Adjusts the blending option. OSD Duration “Keystoning” occurs when a projector is aligned non-perpendicularly to a screen, •...
Page 21
Function F5 key. If using the the top larger (as pictured right), P300 as an external monitor on Windows based systems, this can be done press the top button on the direc- by selecting “extend my desktop to this monitor”.
Technical Details Specifications Troubleshooting Brightness 300 Lumens Native Resolution 1280x800(WXGA) THE PROJECTOR DOES NOT TURN ON Maximum Resolution 1920x1080(1080P) Possible Causes Solution Contrast Ratio 2000:1 There is no power Check to ensure the power outlet or battery Projectoin Lens: Manual Focus source is good.
Page 23
Please direct all customer service inquiries to: AAXA Technologies, Inc. 1541 Parkway Loop Tustin, CA 92780 (714) 957-1999 info@aaxatech.com...
Need help?
Do you have a question about the P300 and is the answer not in the manual?
Questions and answers
cAN YOU OPERATE AP300 PICO PROJECTOR WITHOUT HT E REMOTE CONTROLL
Yes, you can operate the AAXA Technologies P300 Pico Projector without the remote control. You can turn it on and off using the power button on the keypad. Holding the power button for 3 seconds will turn off the projector and put it in standby mode. To fully turn it off, you need to switch the On/Off switch on the side of the projector to the "Off" position.
This answer is automatically generated