Chapter 2: Getting Started - AAXA Technologies P8 User Manual

Getting Started
Powering ON the projector
1. Connect the power cord to the P8.
2. Connect the other end of the power cord into the wall power source.
3. Press the On/Off button at the back of the P8 for about 3 seconds, wait shortly and
the projector should automatically boot up and turn on.
Powering OFF the projector
1. To turn off the projector, press the "On/Off" button.This will fully turn off the projector.
2. Unplug and disconnect the P8 from the power source
Chapter 2
4