Table of Contents
Advertisement
Connecting to a Computer via Digital Input
Step 4:
After connecting your projector to your computer or laptop via a digital input cable, you may need
to enabe Digital Video output on your computer. To enable Digital Video output on your computer
most computers require "turning on" the video output feature. Each computer is different. Please
consult your owner's manual for instructions to enable Digital Video output. Below are standard
instructions for a Windows 10 computer – not all systems are the same.
Step 5:
Press Windows+P to toggle
through display settings. Select
either "Duplicate" or "Extend" de-
pending on your viewing option.
*NOTE: Different operating sys-
tems may differ
Step 6:
1. Right click on computer
desktop and select "Screen
Resolution."
2. Display Properties window
will pop up and select the
Advance Display Settings.
3. Please make sure the "Mul-
tiple displays" has the "Dupli-
cate these displays" option
selected and the Resolution
is 1920 x 1080 or below as
pictured in the red box.
4. If the image is blurry or the
text is not legible, adjust the
screen resolution.
25
Advertisement
Table of Contents
