Table of Contents
Advertisement
Technical Details Cont.
Troubleshooting
THE PROJECTOR DOES NOT TURN ON
Possible Causes
There is no power
The On/Off switch is not on the "On" position
NO PICTURE / FILE NOT SUPPORTED
Possible Causes
The video source is not properly connected or
selected
Incorrect file extension / Video is encoded with
incorrect codec
Solution
Check to ensure the power outlet source is good.
Check the power adapter to ensure a proper con-
nection with the wall outlet as well as the projector.
Confirm that the unit is charged and has enough
power
To power on the projector, the On/Off switch
must be on the "On" position. The unit should
automatically turn on once the switch is in the
"On" position
Solution
Check the video source signal to ensure that it
is properly connected. Select the current input
source by choosing the input desired from the
main menu
Please refer to "Specifications" page to see which
file types and codec are supported. Verify that the
file was encoded properly
51
Advertisement
Table of Contents
