Description; Table 3-1 Machine Design - Siemens SIMOTICS FD 1LL1 Operating Instructions Manual

Description

Applications
This electrical machine has been designed for a wide range of drive and energy conversion
applications. The machines are characterized by extreme ruggedness, long service life, and
overall reliability. They are also highly versatile, allowing them to be tailored to specific
functions.
Details of the supplied machine and permissible operating conditions can be found in this
documentation.
The machine was designed in accordance with the ordering party's specification and may only
be used for the contractually agreed purpose. The permissible operating conditions are
specified on the rating plate. The technical data are described in the catalog.
Risk of explosion
This machine is not designed for use in hazardous areas. An explosion can occur if the
machine is operated in these areas. This can result in death, serious injury or material damage.
● Never operate this machine in hazardous areas.
Machine design
The regulations and standards used as the basis to design and test this machine are stamped
on the rating plate.
The machine design basically complies with the subsequent standards. Please refer to the EU
Declaration of Conformity for the versions of the harmonized standards referenced.
Table 3-1
Feature
Rating and performance
Degree of protection
Cooling
Type of construction
Terminal markings and direction of rotation
Noise emission
Starting characteristics of rotating electrical machines *
Vibration severity grades
SIMOTICS FD 1LL1
Operating Instructions 01/2019
WARNING
Machine design
3
Standard
IEC/EN 60034‑1
IEC/EN 60034‑5
IEC/EN 60034‑6
IEC/EN 60034‑7
IEC/EN 60034‑8
IEC/EN 60034‑9
IEC/EN 60034‑12
IEC/EN 60034‑14
21