Table of Contents
Advertisement
Web Control
NOTE
• Crestron e-Control
Adobe
Flash
®
®
e-Control
is not displayed in a web browser that does not support Flash
®
• If Crestron e-Control
Crestron e-Control
Refer to the following for configuring or controlling the projector via a web browser.
Make sure that your computer and the projector is connected via network, and
then start Web browser.
Enter the projector's IP address into URL input box of the Web browser as the
example below, and then press the Enter key or
Example: If the IP address of the projector is set to 192.168.1.10:
Enter "http://192.168.1.10/" into the address bar of the web browser
and press the Enter key or click
If a correct URL is input, and the projector and your computer are connected to
the same network correctly, the selection window will be displayed.
NOTE
• Do not control the projector with the projector's menu or remote
control, and via Web Control at the same time. It may cause some operational
errors in the projector.
• The language used on the Projector Web Control is the same as that of the
OSD on the projector. If you want to change it, you need to change the OSD
language on the projector. (57)
Login (Projector Web Control)
To use the Projector Web Control function, you need to login with your user name
and password.
Below are the factory default settings for user name and password.
User name
Password
66
is created using Flash
®
Player on your computer to use Crestron e-Control
in the Network Settings (64) is set to Disable,
®
cannot be used to operate the projector.
®
Administrator
<blank>
. You need to install
®
button.
button.
. Crestron
®
.
®
Advertisement
Table of Contents
