Table of Contents
Advertisement
Setting up
5. Connecting the projector to your PC and switching to " "׀to
turn on the power
POWER indicator turns to red, which means the projector is in standby mode.
TM
HDBaseT
12V OUTPUT
CONTROL
(OPTION)
LAN
REMOTE
CONTROL
HDBaseT
HDMI 1
WARNING
unit is attached to it.
►Use extra caution when connecting the power cord, as incorrect or faulty
connections may result in fi re and/or electrical shock.
• Do not touch the power cord with a wet hand.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one. Never modify the power cord.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Do not distribute the power supply to multiple devices. Doing so may overload
the outlet and connectors, loosen the connection, or result in fi re, electric shock
or other accidents.
• Connect the ground terminal for the AC inlet of this unit to the ground terminal
of the building using an appropriate power cord (bundled).
NOTICE
• This product is also designed for IT power systems with a phase-to
phase voltage of 220 to 240 V.
20
V
H
B/Cb/Pb
G/Y
COMPUTER IN 2
DVI-D
►Do not connect the projector to a power supply while no lens
DVI
R/Cr/Pr
COMPUTER IN 1
IN
OUT
SDI
HDMI 2
Advertisement
Table of Contents
