Table of Contents
Advertisement
Power on/off
Power on/off
Turning on the power
Press the
button on the projector or the ON button on the remote control to
start up the projector.
12V OUTPUT
CONTROL
V
H
B/Cb/Pb
(OPTION)
LAN
COMPUTER IN 2
REMOTE
CONTROL
HDBaseT
HDMI 1
DVI-D
Turning off the power
Press the
button on the projector or the STANDBY button on the remote
control. The message will appear on the screen. Press the button again while the
message appears. When the projector has been turned off, the cooling fan will
remain in operation for approximately 120 seconds.
WARNING
Do not look into the lens of the projector or look inside of the projector through
any of the projector's openings since the projection ray may cause a trouble on
your eyes.
►Keep any object away from concentrated projection light beam. Blocking the
beam by something causes high temperature and could result in fire or smoke.
►Do not touch around the ventilation outlet during use or just after use, since it
is too hot.
NOTE
• Turn the power on/off in right order. Power on the projector prior to
the connected devices.
• This projector has the function that can make the projector automatically turn
on/off. Refer to the DIRECT POWER ON (58) and AUTO POWER OFF (58)
items of the OPTION menu.
24
G/Y
R/Cr/Pr
COMPUTER IN 1
INPUT
AUTO
MENU
IN
OUT
SDI
HDMI 2
►A strong light is emitted when the projector's power is on.
LENS
ASPECT
BLANK
CENTERING
LENS
FOCUS ZOOM
EXIT
SHIFT
NETWORK INTERACTIVE
INFO
Advertisement
Table of Contents
