Table of Contents
Advertisement
Setting up
Connecting with your devices (continued)
TM
HDBaseT
12V OUTPUT
CONTROL
(OPTION)
LAN
REMOTE
CONTROL
HDBaseT
NOTE
• Before connecting the projector to a computer, consult the computer's
manual and check the compatibility of the signal level, the synchronization
methods and the display resolution output to the projector.
- Some signal may need an adapter to input this projector.
- Some computers have multiple screen display modes that may include some
signals which are not supported by this projector.
- Although the projector can display signals with a resolution up to UXGA
(1600x1200) or up to W-UXGA (1920x1200), the signal will be converted
to the projector's panel resolution before being displayed. The best display
performance will be achieved if the resolutions of the input signal and the
projector panel are identical.
• If you connect this projector and a notebook computer, you need output the
display to an external monitor, or output simultaneously to the internal display
and an external monitor. Consult the computer's manual for the setting.
• Depending on the input signal, the automatic adjustment function of this
projector may take some time and not function correctly.
(continued on next page)
14
V
H
B/Cb/Pb
COMPUTER IN 2
HDMI 1
DVI-D
Computer
DVI
G/Y
R/Cr/Pr
COMPUTER IN 1
IN
OUT
SDI
HDMI 2
Advertisement
Table of Contents
