Table of Contents
Advertisement
INPUT menu
Item
NOISE
REDUCTION
COLOR SPACE
PbyP / PinP
PinP POSITION
3D FORMAT
3D EYE SWAP
3D DLP LINK
Adjusts the noise reduction level.
HIGH ó LOW
Switches the mode for color space.
AUTO ó REC709 ó REC601 ó RGB PC ó RGB VIDEO
Switches on/off of PbyP/PinP.
This function is unavailable when EDGE BLENDING is set to ON or
3D display is enabled.
Changes the position of sub area in PinP mode.
This function is unavailable when PbyP / PinP is set to OFF.
AUTO is selected as the default setting. If 3D image is not displayed,
it means the input signal does not contain 3D detection signal or
it cannot be detected by the projector. In that case, you need to
select the appropriate 3D format manually. You can select OFF /
AUTO / SIDE BY SIDE (HALF) / TOP AND BOTTOM / FRAME
SEQUENTIAL.
Select "NORMAL" or "REVERSE" to display the appropriate picture.
This function is unavailable when 3D FORMAT is set to OFF or
AUTO.
This projector supports DLP Link glasses only. If your 3D glasses
are not DLP Link format, set this function to "OFF".
This function is unavailable when 3D FORMAT is set to OFF or
AUTO.
Description
INPUT menu
53
Advertisement
Table of Contents
