Table of Contents
Advertisement
Moving the lens horizontally
The distance of horizontal lens shift is 10% of the screen width in both directions.
For instance, if you are using a 2.15m × 1.35m(100") screen, you will be able to
move the picture to the right or the left up to 21.5cm.
H: Range of Horizontal lens shift adjustment
This illustration shows normal horizontal lens shift without using special specifi cation lens
or projector.
NOTE
· When the lens is in the neutral position (i.e. without horizontal or
vertical shift), the center of the projection should be aligned with the center of
the screen. The above-described value is for SD-903 lens.
Lens Memory
This projector can save 3 sets of lens position information (including Focus, Zoom
and Lens shift setting). No matter how you adjust the lens, you can call these lens
memory to restore the lens position setting that you saved in the OSD.
• Load Memory
Select this item to load your own setting for lens.
• Save Setting
You can adjust the OSD's color items by yourself then use this function to save
your setting for lens.
H
H
Operating
29
Advertisement
Table of Contents
