PbyP (Picture by Picture) / PinP (Picture in Picture) (continued)
PbyP / PinP SWAP function
Press the MY BUTTON assigned the PbyP / PinP SWAP (59). The position of
the both area is exchanged without any setting change.
NOTE
• For some signals, it may not be displayed correctly in the PbyP / PinP
mode, even if it can be displayed properly in the normal mode.
• PbyP/PinP is unavailable when ON is selected in GEOMETRY CORRECTION
> EDGE BLENDING > MODE.
• PbyP / PinP is unavailable when 3D is enabled.
Changing the position of sub area
Select in the INPUT MENU > PinP POSITION (53).
Operating
43