Table of Contents
Advertisement
Item
MY BUTTON
(continued on next page)
This item is to assign one of the following functions to MY BUTTON
(1 to 4) on the remote control (7).
(1) Select a button from MY BUTTON - 1 to 4 and press the ► or
ENTER button to display the MY BUTTON setup dialog.
(2) Set one of the following functions to the chosen button. Press
the ENTER button to save the setting.
PbyP / PinP SWAP: Swaps the picture on the right with one on
the left in the PbyP mode. Swaps the primary picture and the
secondary picture in the PinP mode. (43)
PinP POSITION: Toggles the PinP position.
ACCENTUALIZER: Turns on/off the ACCENTUALIZER dialog (51).
HDCR: Turns on/off the HDCR dialog (51).
INFORMATION: Displays SERVICE_ INFORMATION, NETWORK_
INFORMATION, or nothing.
MY MEMORY: Loads one of adjustment data stored (51).
When more than one data are saved, the adjustment changes
every time the MY BUTTON is pressed.
When no data is saved in memory, the dialog "No saved data"
appears.
When the current adjustment is not saved to memory, the dialog
appears.
If you want to keep the current adjustment, press the ► button to
exit. Otherwise loading a data will overwrite the current adjusted
condition.
PICTURE MODE: Changes the PICTURE MODE (49).
TEMPLATE: Makes the template pattern selected to the TEMPLATE
item (57) appear or disappear.
ECO MODE: Changes the ECO MODE.
Description
OPTION menu
59
Advertisement
Table of Contents
