Operating
Using the menu function
This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, NETWORK, and EASY
MENU. EASY MENU consists of functions often used, and the other menus are
classified into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. While the projector
is displaying any menu, the MENU button on the projector works as the cursor
buttons. The basic operations of these menus are as follows.
Some items cannot be operated depending on the selected channel or input
signal. Items that cannot be operated are displayed in light gray.
NETWORK INTERACTIVE
INFO
RESET button
1.
To start the MENU, press the MENU button. The MENU you last used (EASY
or ADVANCED) will appear. EASY MENU has priority to appear just after
powered on.
2.
In the EASY MENU
(1) Use the ▲/▼ cursor buttons to select an item to operate. If you want to
change it to the ADVANCED MENU, select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
In the ADVANCED MENU
(1) Use the ▲/▼ cursor buttons to select a menu.
If you want to change it to the EASY MENU, select the EASY MENU. The
items in the menu appear on the right side.
(2) Press the ► cursor button or ENTER button to move the cursor to the
right side. Then use the ▲/▼ cursor buttons to select an item to operate
and press the ► cursor button or ENTER button to progress. The
operation menu or dialog of the selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
(continued on next page)
44
Cursor buttons
MENU button
ENTER button
ENTER button
MENU button
12V OUTPUT
CONTROL
V
H
B/Cb/Pb
G/Y
(OPTION)
LAN
COMPUTER IN 2
REMOTE
CONTROL
HDBaseT
HDMI 1
DVI-D
LENS
R/Cr/Pr
COMPUTER IN 1
INPUT
AUTO
ASPECT
CENTERING
BLANK
LENS
FOCUS ZOOM
MENU
EXIT
SHIFT
IN
OUT
SDI
HDMI 2