Table of Contents
Advertisement
5 SETTINGS AND PROCEDURES BEFORE SYSTEM OPERATION
GSD file for
QJ71PB93D
5 - 3
(1) Procedure for setting the slave parameters for QJ71PB93D to the
master station
1. Read the GSD (DDB) file of the QJ71PB93D to the configurator corresponding
to the master station used. (Refer to (2) in this section)
2. Set the QJ71PB93D slave parameters using the configurator.
3. Write the parameters to the master station.
Configurator
(DDB file)
REMARKS
Refer to Section 5.2.1 to 5.2.3 for setting examples using GX Configurator-DP.
When using another configuration tool on the master station, refer to the relevant
manual.
(2) GSD (DDB) file
(a)
When using GX Configurator-DP
GSD files have been incorporated into GX Configurator–DP.
GSD file installation is, therefore, unnecessary.
(b)
When using another configuration tool on the master station
Please consult your local Mitsubishi representative for the GSD (DDB) file
of the QJ71PB93D.
Write
Master station
MELSEC-Q
5 - 3
Advertisement
Table of Contents
