Swap Setting - Mitsubishi Electric QJ71PB93D User Manual

5 SETTINGS AND PROCEDURES BEFORE SYSTEM OPERATION

5.2.3 Swap setting

5 - 11
Set whether the word data swap function will be used or not.
Refer to Section 4.1.4 for the word data swap function.
(1) Setting method when using GX Configurator-DP
This section describes how to make setting from GX Configurator-DP.
When using another configuration tool, refer to the relevant manual.
1) Open the "Slave Modules" window (refer to Section 5.2.1 (4)).
Click the [Next] button in the "Slave Modules" window.
MELSEC-Q
5 - 11