Mitsubishi Electric QJ71PB93D User Manual page 70

Melsec q series profibus-dp slave module
Table of Contents

Advertisement

5 SETTINGS AND PROCEDURES BEFORE SYSTEM OPERATION
5 - 10
(2) Setting method when using GX Configurator-DP
This section describes how to make setting from GX Configurator-DP.
When using another configuration tool, refer to the relevant manual.
1) Open the "Slave Modules" window (refer to Section 5.2.1 (4)).
Click the [Next] button in the "Slave Modules" window.
2) Set a mode for the "Data Alignment Mode" in the "Slave User
Parameters" window.
Item
Data Alignment Mode
3) Write the configured parameters into the master station.
REMARKS
Refer to GX Configurator-DP Version7 Operating Manual for creating projects and
writing parameters to the master station by GX Configurator-DP.
Description
LUMP mode
: Assigns data as a lump. (Default)
DIVIDED mode : Assigns data individually.
MELSEC-Q
5 - 10

Advertisement

Table of Contents
loading

Table of Contents