Table of Contents
Advertisement
5 SETTINGS AND PROCEDURES BEFORE SYSTEM OPERATION
5 - 12
2) Configure the setting for "Word Data Swap" in the "Slave User
Parameters" window.
Item
Word Data Swap
3) Write the configured parameters into the master station.
REMARKS
Refer to the GX Configurator-DP Operating Manual for creating projects and writing
parameters to the master station by GX Configurator-DP.
Description
enable : Swaps the high and low bytes of data in units of
words when receiving or sending I/O data.
disable : Sends or receives I/O data as they are. (Default)
MELSEC-Q
5 - 12
Advertisement
Table of Contents
