Mitsubishi Electric QJ71PB93D User Manual page 21

2 SYSTEM CONFIGURATION
(1) There are restrictions on the number of automatic refresh parameters that can
(2) To utilize the data consistency function and dedicated instruction, use a CPU
(2) Compatibility with a multiple CPU system
(3) Compatibility with online module change
(4) Applicable software packages
2 - 2
POINT
be set for CPU modules.
For details, refer to Section 5.3.1(5).
module whose first 5 digits of the serial No. is "02092" or later.
If this function is used in any other models, I/O data may be identified as invalid
values.
(b) When mounting to remote I/O station of MELSECNET/H
The QJ71PB93D cannot be mounted to remote I/O station of the
MELSECNET/H.
Mount it next to the CPU module on the MELSECNET/H remote master
station.
When using the QJ71PB93D in a multiple CPU system, refer to the User's
Manual (Multiple CPU System) for CPU module used.
(a) Compatible QJ71PB93D
The function version of the QJ71PB93D has been "B" from the first release
and it supports the multiple CPU system.
The QJ71PB93D cannot be changed online.
Please configure the system by combining QJ71PB93D and software package
as follows:
GX Works2: For setting CPU module parameters and creating sequence
programs (Required)
GX Configurator-DP : For setting the QJ71PB93D station number and automatic
refresh parameter
1 GX Configurator-DP is required when using automatic refresh.
The station number can also be set on a sequence program. (Refer to Section 5.3)
MELSEC-Q
1
2
2 - 2