Mounting and commissioning the machine
8
Switching the machine on/off
.05
● Check air pressure on pressure gauge 1 and, if necessary, adjust air pressure with adjus-
● Turn main switch 3 to position "I".
● After booting the machine control unit, to start the machine, move it back to its basic
● Carry out a test run, see Chapter 10 Sewing.
● To switch off the machine, turn main switch 3 to position "0".
Description of other functions on the display
Input menu
This function is used to call up the input mode, see Chapter 11 Input.
24
8
6
100
150
4
50
2
0
0
1
Fig. 8 - 05
ting knob 2.
position.
When commissioning the machine, the zero points must be checked or adjus-
ted (see Chapter 8.09 Checking / adjusting the zero points).
2
10
12
200
14
230
16
Fig. 8 - 06
3