Sewing - Pfaff 3588-05/020 Instruction Manual

10

Sewing

In particular for the production, in addition to the input mode, see Chapter 11 Input, the sew-
ing mode is available. Here, depending on the program selection and the machine status, all
relevant functions and settings for the production are shown on the display. Automatic ope-
ration is standard, but it is possible to switch to manual operation when setting up and
checking operating sequences.
Before production the following conditions must be fulfi lled:
● All safety devices must be attached and all covers closed see, Chapter 1.06 Danger war-
nings.
● The machine must be properly installed and commissioned in accordance with Chapter
8 Installation and commissioning.
● All setting-up work must have been carried out, see Chapter 9 Setting-up.
● Switch on the machine
● Select either automatic or manual sewing. The current operating mode is shown as an
inverse symbol.
The machine may only be operated by appropriately instructed personnel! The
operating staff must make sure that only authorized persons are in the danger
area of the machine!
Sewing
47