Pfaff 3588-05/020 Instruction Manual page 28

Mounting and commissioning the machine
● Call up the "teach-in position" function.
● Check if adjustment pin 1 can be inserted in the holes of the sewing jig and table when
● If necessary, correct the position of the sewing jig accordingly using the direction sym-
● Save the setting.
● To quit the menu without taking over the change in position, use the "Esc" function.
28
1
Fig. 8 - 08
the sewing jig is in this position.
bols.
If this position is altered, the needle position must also be adjusted, as descri-
bed in the following section!