Adjusting The Folding, Feed And Stacker Devices; Aligning The Sewing Jig - Pfaff 3588-05/020 Instruction Manual

Adjustment
13

Adjusting the folding, feed and stacker devices

.06
13

Aligning the sewing jig

.06.01
● Loosen screws 1 on both sides of the machine.
● Align the sewing jig by turning screws 2 (nuts 3) on both sides of the machine so that it is
● Tighten screws 1.
● Align the sewing jig by moving the carrier 4 (screws 5 on both sides of the machine) so
120
Requirement
The lowered sewing jig must lie evenly and lightly on the table top at both the folding and
the sewing stations, and hold the workpiece securely.
5 5
2
Fig. 13 - 28
parallel to the table top in the x-direction.
that it is parallel to the table top in the y-direction.
4
X
1
3
Y
X
Y