Adjustment
13
Sewing motor adjustments
.09
● Switch on the machine.
● Call up the input mode.
● Call up the "sewing motor adjustments".
Description of the functions
Conclude input
This function is used to conclude the input and change to the sewing mode.
Speed adjustment
This function is used to increase or reduce the set speed.
Start
This function is used to start the motor running.
Stop
This function is used to stop the motor running.
Thread trimming cycle
This function is used to run the thread trimming cycle.
Needle position
The present set position of the needle is displayed.
To adjust the needle bar position to t.d.c., bring the needle bar into the appropriate position
by turning the balance wheel, and then operate the "POS" function to take over this position.
142