Register 06 - Pfaff 3588-05/020 Instruction Manual

● Insert a new pocket plate and a matching sewing jig.
● Tighten screws 1 and 2.
● Confi rm change of pocket plat and sewing jig.
● Unscrew the compressed air supply 5.
● Loosen screw 6 and remove folder set 7.
● Insert the folder set which matches the pocket plate and the sewing jig, tighten screw 6
and screw the compressed air supply 5 back on.
● Conclude the part set change.
● Move to the basic position, the machine is ready for operation.
Select the matching program number to the part set!
Incorrect combinations can cause severe damage to the machine!
Preparation
45