Height Of The Pocket Plate Guide - Pfaff 3588-05/020 Instruction Manual

13

Height of the pocket plate guide

.06.02
Requirement
The lowered pocket plate must be parallel to the top edge of the table.
Fig. 13 - 29
● Check the requirement using a metal ruler.
● Loosen screws 1 and 2.
● Adjust the height of the guide 3 with screw 4 (nut 5) according to the requirement.
● Turn the plunger (lock nut) of cylinder 6 until the guide 3 is parallel to the table top.
● Tighten screws 1 and 2.
3
2
5
1 1
4
6
Adjustment
121