Options Part Numbers - Thinklogical VelocityKVM-5 Product Manual

Advanced Top Quality Video Transmission
Fiber optic cable has emerged as a logical solution for next-generation signal routing. The VelocityKVM
product family harnesses this capability and ensures long distance, error-free transmission with no frame
or bit dropping and complete immunity to interference. The end result is no degradation of the video
or peripheral signal whatsoever.

Options Part Numbers

Each model's part number indicates features included on that particular model. See pages 10-12 for the
full line of VelocityKVM Extender options. Also see page 44 for more on numbering formats.
VEL-WR0M04-SCTX:
VelocityKVM 1 DVI Display Transmitter with USB HID, USB 2.0 and redundant, multi-mode fiber paths
VEL-WR0M04-SCTX: VEL
USB HID and USB 2.0 only (USB 1.1 is not supported). This is the standard USB configuration for our
Velocity line. R indicates redundant fiber paths. 0 is a place holder.
04 designates our 1 DVI Display model.
is a Transmitter.
VEL-H0DM24-LCRX:
VelocityKVM 2 DVI Display Receiver with USB HID only and separate multi-mode data fiber paths
VEL-H0DM24-LCRX: VEL
USB HID Only option (USB 2.0 is not supported). 0 is a place holder.
M indicates Multi-Mode optics.
connectors. RX indicates that this unit is a Receiver.
Note: Thinklogical will no longer support the hardware required for USB 1.1. Thinklogical
will continue software support for all USB 1.1 units. Contact
V e l o c i t y K V M E x t e n d e r P r o d u c t M a n u a l , R e v .
indicates the Velocity line of extenders. The part number's leading
SC indicates SC-Type fiber connectors.
indicates the Velocity line of extenders. The part number's leading
24 designates our 2 DVI Display model.
LINE IN
USB HID
USB
MIC OUT
2.0
M indicates Multi-Mode optics.
TX
D indicates Separate Data Paths.
LC
support@thinklogical.com.
C , F e b r u a r y , 2 0 1 7
UPDATES
HOST
DEV
CTRL
W indicates
indicates that this unit
H indicates the
indicates LC-Type fiber
Page 8