Table of Contents
Advertisement
StudioPRO Extenders :
Data Fiber
Data Fiber
Video Fiber
Figure 5: Possible Device Connections, Example: Single Link USB 2.0 Receiver Shown
9. Turn on your PC.
If your Display is not turned on as indicated in #3 above, or there is no DDC2B signal received, the
default resolution will be 800x600.
Your StudioPRO Extender System is now properly connected.
3.3.1. Fiber Optic Cables
Fiber Optic cables for the SPE system are not included, but are available for purchase. Please contact
thinklogical for a quotation on your required cable length.
A fiber optic cable must be run between the location of the SPE Transmitter (near your CPU or other
DVI-D video source) and the SPE Receiver (near the monitor, projector, etc.). The standard multi-mode
fiber cable must be 50 or 62.5 micron, terminated with an LC, SC, or ST-type twist-lock connector and no
longer than 1000 meters (3280 running feet). Be careful to not kink or pinch the fiber cable as it is being
installed, and keep all bend radii to no less than 3 inches.
MAN-000018
L3
USB 2 .0
DVI TO DISPLAY
SINGLE LINK
DVI
Display
USB 2.0
5 VDC External Universal
SPE-SL2.0 Receiver
L1
L2
T
USB
DVD
Tablet
Power Module
9
5VDC
R
POWER
Keyboard /mouse
REVISION A
Advertisement
Table of Contents
