Sales Transaction With A Contactless Card; Sales Transaction - Ingenico ICT220 User Manual

3.

SALES TRANSACTION WITH A CONTACTLESS CARD

3.1

SALES TRANSACTION

The terminal is in the standby mode.
Enter the sum of the transaction as a final sum.
For instance, 319 (3.19 EUR)
Then press the green key (ENTER).

In case of a contactless card transaction the card shall be
touched against the pinpad's screen
The terminal shall perform automatic control and the following information will appear on the screen
The terminal connects to the control center and performs
automatic control.
The terminal receives response from the control center.
The terminal receives the transaction confirmation from the
control center.
At the end of the transaction the terminal asks for confirmation
for printing of the second receipt.
When the red button is pressed the buyer's receipt is not printed.
The transaction is complete.
Notes:
Terminal can ask to use the card's chip.
(For instance, where the sum exceeds the contactless
transaction's limit).
Insert the chip card in the reader and perform the payment just as
you would in case of an ordinary chip card transaction.
ACTION PINPAD
TERE TULEMAST
PALUN OODAKE
Kasutage kaarti
3.19 EUR
ÜHENDUS
PALUN OODAKE
Tehing sooritatud
PALUN OODAKE
Info
Kasutage kiipi
Kaarditehing
11.00 EUR
Kasutage kaarti
8
TERMINAL
TERE TULEMAST
SUMMA (EUR)
Sisestage summa...
3.19
Kaarditehing
3.19 EUR
Kasutage kaarti
ÜHENDUS
PALUN OODAKE
Autoriseerimine
OOTAN VASTUST...
Tehing sooritatud
Võta kviitung ja
Vajuta klahvi
Info
Kasutage kiipi
Kaarditehing
11.00 EUR
Kasutage kaarti