Com Menu - Honeywell 301C User Manual

COM Menu

This screen displays the selected communication protocol for device
addresses from 1 to 96. Each transmitter's protocol is defined by the
controller (see Network Auto-configuration section)
If a transmitter is compatible with several different protocols, it can be
modified using to one of the following options:
•
Vulbus
•
Mdbs ASCII 7D 2S NP 9600 bauds
•
Mdbs RTU 8D 2S NP 9600 bauds
•
Mdbs RTU 8D 1S NP 9600 bauds
•
Mdbs RTU 8D 1S OP 9600 bauds
When a transmitter is configured with the Modbus communication
protocol, the transmitters automatically sends the programmable
parameters to the controller.
Note: Vulbus transmitter parameters must be programmed manually.
26