Setup Menu; Accessing The Menus; Using The Menus - Honeywell T775P 2000 Series Installation Instructions Manual

T775P SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLER
HOME
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12
SENSORS STG1
SUPPLY A
180.5
o
F
SETPOINT
66.0
OUTDOOR B
72.5
o
F
SUPPLY A
180.5
RETURN C
100.5
o
F
RT 1476 HRS
DI ON
DI ON
1 2 3 4 5 6 7 8 9 10 11 12
STG3
SETPOINT
RETURN C
100.5
RT 1193 HRS
DI ON
Fig. 15. LCD Display - Home Screen Displaying
Sensors, Stages, and Pump Out.
NOTES:
1. The stage home screens do not dynamically
update the active relay status and sensor val-
ues. The information is a snapshot taken
when you press the  or  button to display
the screen.
2. In Reset mode, the home screen displays the
effective setpoint.
IMPORTANT
After four minutes of inactivity (no buttons
pressed), the LCD display reverts to the home
screen display.

Accessing the Menus

Menus are used for programming, scheduling, viewing the
summary settings, and setup of advanced options.
Program, Schedule, and Summary
Menus
To access these menus from the home screen, press the
MENU button. See Fig. 16.
62-0256—11
HOME HOME
1 2 3 4 5 6 7 8 9 10 11 12
ON STG2
SETPOINT T
66.0
o
F
OUTDOOR B
72.5
o
F
RT 832 HRS
DI ON
HOME HOME
1 2 3 4 5 6 7 8 9 10 11 12
OFF STG4
PUMP OUT
SETPOINT T
66.0 66.0
o
F
SUPPLY A
180.5
o
F
RT 1287 HRS
DI ON
HOME
1 2 3 4 5 6 7 8 9 10 11 12
ON
SENSORS
o
F
SUPPLY A
180.5
o
F
OUTDOOR B
72.5
RETURN C
100.5
DI ON
home
ON
o
F
o
F
Depending on whether scheduling is enabled or not, the
LCD displays one of two menus as shown in Fig. 16.
Scheduling is enabled from the Setup menu's Output
settings. See "1.3.2. SCHEDULE" on page 16.

Setup Menu

To access the Setup menu for advanced options, press
M24394A
and hold the MENU button for five seconds. See Fig. 17.
1 2 3 4 5 6 7 8 9 10 11 12
SUPPLY A
OUTDOOR B
RETURN C
DI ON

Using the Menus

When you are working with the menus, use the:
• Left arrow button () to scroll backward through the
menus
• Right arrow button () to select the highlighted menu
item and display its content
• Up and Down arrow buttons ( and ) to scroll up
and down through a list of items or to increase or
decrease the value of a displayed parameter
NOTE: If you press the HOME button or there is no
keypad activity for four minutes, you exit
Setup mode and return to the home screen.
If you press the MENU button, you exit Setup.
mode and go to the Program menu.
10
MENU DISPLAY WHEN
SCHEDULING IS SET
MENU
PROGRAM
SCHEDULE
o
F
SUMMARY
EXIT
o
F
o
F
menu
OR
Fig. 16. Menus.
HOME
SENSORS
180.5
o
F
72.5
o
F
100.5
o
F
FIVE
home menu
SECONDS
Fig. 17. Setup Menu.
MENU DISPLAY WHEN
SCHEDULING IS NOT SET
MENU
PROGRAM
EXIT
M24395
SETUP
SENSORS
OUTPUTS
ALARMS
EXIT
M24396