System Configuration; Nomenclature - Mitsubishi FX-10GM User Manual

FX-10GM POSITIONING CONTROLLER

1.2 System Configuration

1.2.1

Nomenclature

This section explains the names of the terminals and the connectors provided in the
FX-10GM.
Power supply terminals
Connector for the FX/FX
Series programmable controller
Enlarged view of the lower left side
When the top cover is removed
2C
CN1:Connector for I/Os
Connector for
an extension
unit/block for
the programmable
controller
Connector for
programming
CN2:Connector for drive unit
INTRODUCTION 1
Mounting hole.2- 5.5 DIN rail
Not used when the unit is mounted
to a DIN rail
Operation
indicator LEDs
I/O output
status
indicator LEDs
1-2