System Configuration; Applicable Systems - Mitsubishi MELSEC Q Series User Manual

2 SYSTEM CONFIGURATIONS

2 SYSTEM CONFIGURATION

This section describes the systems to which the QD62 (E/D) can be applied.

2.1 Applicable Systems

This section explains the applicable system.
(1)
Applicable CPU module
CPU type
Basic model QCPU
3
High Performance
model QCPU
Programmable
controller CPU
Process CPU
Universal model
QCPU
Redundant CPU
2 - 1
Applicable modules and base units, and No. of modules
(a) When mounting to CPU module
The table below shows the CPU modules and base units applicable to the
QD62 (E/D) and quantities for each CPU model.
Depending on the combination with other modules or the number of
mounted modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if
the power supply capacity is insufficient, change the combination of the
modules.
CPU model
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Q12PHCPU
Q25PHCPU
Q02UCPU
Q03UDCPU
Q04UDHCPU
Q06UDHCPU
Q12PRHCPU
4
Q25PRHCPU
1: Limited within the range of I/O points for the CPU module
2: Can be installed to any I/O slot of a base unit.
3: For the coincidence detection interrupt function, use the CPU module
of function version B or later.
4: Use the QD62 (E/D) module whose first 5 digits of serial No. is "09012"
or later.
No. of modules 1
Main base unit
Up to 16
Up to 24
Up to 64
Up to 64
Up to 36
Up to 64
Up to 53
MELSEC-Q
Base unit 2
Extension base unit
: Applicable, : N/A
2 - 1
2