Introduction; Outline - Mitsubishi FX-10GM User Manual

FX-10GM POSITIONING CONTROLLER

1. INTRODUCTION

This section explains the outline of the positioning unit and the related peripheral
units.
In description, the FX-10GM may be abbreviated as "10GM".
For complete operation, wiring, mounting and programming instructions please refer
to the FX-10GM, FX(E)-20GM HARDWARE/PROGRAMING MANUAL, FX
PROGRAMMING MANUAL and FX SERIES HARDWARE MANUAL.

1.1 Outline

The FX-10GM positioning unit is the pulse chain output type, and enables the positioning
control of the stepping motor or the servo motor via the drive unit.
Number of
control axes
1
Number of control axes
FX-10GM: For one axis.
Positioning languages
Both dedicated positioning language (cod instructions) and sequence language (basic
instructions and application instructions).
The languages are compatible among the FX-10GM.
Number of output pulses
High-speed pulse output from 1 PPS to 200 kPPS maximum.
Programmable controller connected
The FX-10GM can be connected to the FX/FX
read or write the positioning data. Each unit can also be used independently.
Positioning languages
Dedicated language
+
Sequence language
Number of output
Connection to Programmable controller
pulses
Connected to FX/FX2C or performs
1 to 200 kPPS
independently
Series programmable controller to
2C
INTRODUCTION 1
1-1