2 SYSTEM CONFIGURATION
2. SYSTEM CONFIGURATION
The system configuration for using R2 is shown explained in this section.
2.1 System configuration
The system configuration for using R2 is shown below.
Up to 26 R2 modules can be connected to one master station.
CC-Link master/local station (master station)
Personal computer Bar code reader
CC-Link dedicated cable
AJ65BT-R2
(Intelligent device station)
1-station occupation
RX/RY
RWr/RWw 4 points each
RS-232-C cable
External device
2 - 1
CC-Link master/local station (local station)
Remote device station
32 points each
MELSEC-A
Remote I/O station
2