2 INTRODUCTION
2
INTRODUCTION
Tig 3001i is a TIG welding power source, which can also be used for MMA welding.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1
Equipment
Tig 3001i can be supplied with or without cooling unit.
The power source is supplied with:
•
4.5 m return cable with contact clamp
•
instruction manual for the welding power source
•
instruction manual for the control panel
•
instruction manual for the cooling unit (if applicable)
Instruction manuals in other languages can be downloaded from the Internet:
2.2
Control panels TA23 and TA24
The power source is supplied with one of the following control panels:
Welding process parameters are controlled via the control panel. See the separate
instruction manual for a detailed description of the panels.
0460 742 001
- 7 -
www.esab.com
© ESAB AB 2017