ESAB Origo Tig 3001i Instruction Manual page 9

3 TECHNICAL DATA
Enclosure class
Application class
Mains supply, S
sc min
Minimum short circuit power on the network in accordance with IEC 61000-3-12.
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 40 °C / 104 °F, or below.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23 is intended for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
Cooling power of cooler
at 50 Hz
at 60 Hz
Coolant
0460 742 001
Tig 3001i, Tig 3001iw
Tig 3001iw only (cooling unit specific)
Power
0.82 kW
0.76 kW
ESABs ready mixed coolant. See the
"ACCESSORIES" chapter of this manual.
- 9 -
IP 23
at flow Max pressure
1 l/min 0.39 MPa
1 l/min 0.44 MPa
© ESAB AB 2017